Making wine is something that you can and should be doing. If you enjoy wines you’ll enjoy making them yourself. Accomplishing this process is one that will please anyone who has a bit of creative energy and anyone that wants to really experience the process. The first step of making wine is to get the flavor of the fruit from within the fruit into your wine.

You can use grapes or many other types of fruit, depending on what you would like the wine to taste like. To extract the flavor, most commonly, the fruit is pressed. Most fruits, besides that of a citrus fruit can be pitted (if necessary) and pressed. But, there are other ways to get the fruit from the wine as well. For example, another option would be to use cold maceration.

To do this, the fruit is first crushed and chopped. Then it is added to its fermentation vessel and all of the ingredients from the recipe that will be used such as the sugar and waters will be added. It must then be set aside for eight hours. Once pectin enzyme has been added and mixed well, the wine must be refrigerated for up to two days, no less than one.

When it is brought up to room temperature, more ingredients are added and stirred in before the yeast is added. There are other ways that the fruit that you plan to use in your wine making can have the fruit’s flavor extracted including crushing, boiling, chopping and cutting. Pressing and even soaking the fruit can be used as well. When you select a method you will want to insure that your recipe is adjusted for that specific method. Some recipes are designed to work with a certain method of extraction to gain the type of flavor that is necessary.

Your first fermentation

During the process of making wine, you will need to ferment the wine several times. With each step there is a need to examine the wine and to take the appropriate action. No matter what type of recipe you are using, the goal will be to find the best fermentation period. Once you have gotten the fruit’s flavor extracted from it, you can begin the first step of fermentation.

During this step, you’ll add in additional ingredients to the fruit in order to create the flavor that you want and then ferment the mixture for three to ten days. The temperature for this fermentation step is important. Get it as close to 70 to 75 degrees Fahrenheit as possible. During this step, you’ll need to add sulfites to the mixture in order to keep bacteria from growing in the wine.

It will also help with oxidation. To do this, dissolve Campden tablets or use a powdered potassium metabisulfite. Next, you’ll need to add in pectin enzymes which have several jobs. The most important is for it to remove the pectin that’s found in fruits so that it does not spoil the wine. In addition to that, it also helps to begin the process of breaking down the wine by destroying cell walls.

This should be added to the base after eight hours of resting from the time of the sulfite being added. The next consideration is for the acid that’s in the wine. It is important for the acid to be adjusted in such a way as will allow for the acid to be balanced depending on what the fruit needs. For example, some fruits are too acidy while others don’t have enough.

Your recipe will help you with this. In addition to these, the recipe that you have will tell you the right amount of water, nutrients, and finally yeast that you need. You’ll then need to place the mixture into the fermenting vessel to get started. During the first 3 days, there is a need for oxygen to be allowed in. Follow your recipes instructions for exacts.

Your second fermentation cycle

Once you have allowed your wine to ferment for several days, it will be time to take the next step in its making. During this process, you’ll be adding in additional ingredients and to skim off the liquid from the pulp that remains. When you go through the wine making process, this second fermentation period will be critical.

Ultimately, you’ll want that period to last at least several weeks and it should be done at a temperature that’s at 60 to 65 degrees Fahrenheit, ten degrees lower than it was. First get rid of the solids that remain in the wine making. Pour it through a funnel, then, into the second fermentation vessel that you are using.

Insure that the less are also placed into the second vessel. But, before you can do this, you may ask, how long should you wait? You should start the transfer into the secondary vessel after the fermentation process has slowed to some degree.

Now, after you have transferred the mixture to the secondary vessel, you’ll want to attach the appropriate air lock to the vessel. This is called a fermentation trap and it will fit to the mouth of the bottle you are using. It is important to keep as much of the air contact out of the transfer process as possible, which is no easy task. Your recipe may call for specific instructions on how to do this.

Now that you have moved it to the secondary vessel, it again needs time to ferment. While that fermentation will not be nearly as vigorous, it will still cause enough reaction to notice. You’ll want to set it in a room for at least several days, but it is better if it is a couple of weeks. Leave it alone as long as you can, or as your recipe directs.

Excerpted from the book Wines And Spirits Inside Out! by Wings Of Success.

This excerpt has been edited and condensed for clarity.

Download this book on Boostlane:

https://boostlane.com/p/boostlane/680/wines-and-spirits-inside-out/